Issue 12, 2013

Measurement of the sulphur isotope ratio (34S/32S) in uranium ore concentrates (yellow cakes) for origin assessment

Abstract

A novel method has been developed for the measurement of the 34S/32S isotope ratio in uranium ore concentrate (yellow cake) samples for origin assessment in nuclear forensics. The leachable sulphate is separated and pre-concentrated by anion exchange separation followed by the 34S/32S ratio measurement by multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). The effect of sample composition on the accuracy was investigated and optimized. Matching of the sample to the bracketing standard was necessary to obtain accurate results. The method was validated by the measurement of standard reference materials (IAEA-S-2, IAEA-S-3 and IAEA-S-4) and the δ34S value could be determined with an uncertainty between 0.45‰ and 1.9‰ expressed with a coverage factor of 2. The method was then applied for the analysis of uranium ore concentrates of world-wide origin. In the studied materials distinct 34S/32S isotope ratios could be observed, which can be a promising signature for the nuclear forensic investigations to identify the source of unknown nuclear materials.

Graphical abstract: Measurement of the sulphur isotope ratio (34S/32S) in uranium ore concentrates (yellow cakes) for origin assessment

Article information

Article type
Paper
Submitted
10 Jul 2013
Accepted
17 Sep 2013
First published
17 Sep 2013

J. Anal. At. Spectrom., 2013,28, 1919-1925

Measurement of the sulphur isotope ratio (34S/32S) in uranium ore concentrates (yellow cakes) for origin assessment

S. Han, Z. Varga, J. Krajkó, M. Wallenius, K. Song and K. Mayer, J. Anal. At. Spectrom., 2013, 28, 1919 DOI: 10.1039/C3JA50231G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements