Issue 16, 2013

Highly enhanced energy conversion from the streaming current by polymer addition

Abstract

In this contribution, we present for the first time the experimental results of energy conversion from the streaming current when a polymer is added to the working solution. We added polyacrylic acid (PAA) in concentrations of 200 ppm to 4000 ppm to a KCl solution. By introducing PAA, the input power, which is the product of volumetric flow rate and the applied pressure, reduced rapidly as compared to the case of using only a normal viscous electrolyte KCl solution. The output power at the same time remained largely constant, whereby an increase of the streaming current and a decrease of the streaming potential simultaneously occurred. These combined factors led to the massive increase of the energy conversion efficiency. Particularly, the results showed that when PAA was in a 0.01 mM KCl solution, the energy conversion efficiency of the system was enhanced by a factor of 447 (±2%), as compared to the case of the solution containing only 0.01 mM KCl. An enhancement factor of 249 (±4%) was also observed when PAA was added to the higher ionic strength background solution, 1 mM KCl. This finding can have practical use in microchannel-array energy conversion systems. When, instead of the negatively charged PAA, a non-ionic polymer polyethylene oxide (PEO) was added to the solution, no efficiency increase was observed, probably due to polymer wall adsorption.

Graphical abstract: Highly enhanced energy conversion from the streaming current by polymer addition

Supplementary files

Article information

Article type
Paper
Submitted
06 Nov 2012
Accepted
13 May 2013
First published
13 May 2013

Lab Chip, 2013,13, 3210-3216

Highly enhanced energy conversion from the streaming current by polymer addition

T. Nguyen, Y. Xie, L. J. de Vreede, A. van den Berg and J. C. T. Eijkel, Lab Chip, 2013, 13, 3210 DOI: 10.1039/C3LC41232F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements