Issue 15, 2013

Ultraselective and sensitive detection of xylene and toluene for monitoring indoor air pollution using Cr-doped NiO hierarchical nanostructures

Abstract

Ultraselective and sensitive detection of xylene and toluene with minimum interferences of other indoor air pollutants such as benzene, ethanol, and formaldehyde is achieved using NiO hierarchical nanostructures doped with Cr. Pure and 1.15–2.56 at% Cr-doped NiO flower-like hierarchical nanostructures assembled from nanosheets are prepared by a simple solvothermal reaction and their gas sensing characteristics toward o-xylene and toluene gases are investigated. The 1.15 at% Cr-doped NiO hierarchical nanostructures show high responses to 5 ppm of o-xylene and toluene (ratio of resistance to gas and air = 11.61 and 7.81, respectively) and negligible cross-responses to 5 ppm of benzene, formaldehyde, ethanol, hydrogen, and carbon monoxide. However, pure NiO nanostructures show low responses to 5 ppm of o-xylene and toluene (ratio of resistance to gas and air = 2.01 and 1.14, respectively) and no selectivity toward any specific gas is observed. Significant enhancement of the response and selectivity to o-xylene and toluene is attributed to the decrease in the hole concentration in NiO and the catalytic oxidation of methyl groups by Cr doping.

Graphical abstract: Ultraselective and sensitive detection of xylene and toluene for monitoring indoor air pollution using Cr-doped NiO hierarchical nanostructures

Supplementary files

Article information

Article type
Paper
Submitted
15 Mar 2013
Accepted
22 May 2013
First published
23 May 2013

Nanoscale, 2013,5, 7066-7073

Ultraselective and sensitive detection of xylene and toluene for monitoring indoor air pollution using Cr-doped NiO hierarchical nanostructures

H. Kim, J. Yoon, K. Choi, H. W. Jang, A. Umar and J. Lee, Nanoscale, 2013, 5, 7066 DOI: 10.1039/C3NR01281F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements