Issue 18, 2013

An ingenious replica templated from the light trapping structure in butterfly wing scales

Abstract

Although the physical mechanism of light trapping property of butterfly wings is well understood, it remains a challenge to create artificial replicas of these natural functional structures. Here, we synthesized a SiO2 inverse replica of a light trapping structure in butterfly wing scales using a method combining a sol–gel process and subsequent selective etching. First, the reflectance spectrum was taken to measure the reflectivity. Then, FESEM and TEM were used to observe the coupling structure of scales and the replicas. Afterwards, assisted by SEM and TEM data, 3D optimized models of the structures and fabrication process were generated by software. Finally, the parametric comparisons of the morphologies and structures between the original template and the inverse SiO2 replica were carefully conducted, and it was found that the original structures of bio-templates were well inherited by the structures of the inverse replica. This work would open up possibilities for an extensive study of mimicking novel bio-inspired functional materials, and the reported biomimetic technique confirms the feasibility of extending the functional structures in butterfly wings to particular optical devices in the field of space exploration, space equipment, photoelectrical devices and photo-induced sensors.

Graphical abstract: An ingenious replica templated from the light trapping structure in butterfly wing scales

Supplementary files

Article information

Article type
Paper
Submitted
26 Mar 2013
Accepted
19 May 2013
First published
21 May 2013

Nanoscale, 2013,5, 8500-8506

An ingenious replica templated from the light trapping structure in butterfly wing scales

Z. Han, S. Niu, M. Yang, J. Zhang, W. Yin and L. Ren, Nanoscale, 2013, 5, 8500 DOI: 10.1039/C3NR01455J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements