Issue 20, 2013

Hierarchical structures of AlOOH nanoflakes nested on Si nanopillars with anti-reflectance and superhydrophobicity

Abstract

A novel method to fabricate ultra-low reflective Si surfaces with nanoscale hierarchical structures is developed by the combination of AlOOH or boehmite nanoflakes nested on plasma-etched Si nanopillars. Using CF4 plasma etching, Si surfaces are nanostructured with pillar-like structures by selective etching with self-masking by fluorocarbon residues. AlOOH nanoflakes are formed by Al thin film coating with various thicknesses and subsequent immersion in boiling water, which induces the formation of nanoscale flakes through the hydrolysis reaction. AlOOH nanoflakes are formed on Si nanopillared surfaces for hierarchical structures, which are coated with a low-surface-energy material, resulting in a higher water wetting angle of over 150° and a very low contact angle hysteresis of less than 5°, and implying a self-cleaning surface. Reflectance reduced to 5.18% on average on hierarchical nanostructures in comparison to 9.63% on the Si nanopillar surfaces only. We found that Si nanopillars reduced reflection for wavelengths ranging from 200 to 1200 nm while AlOOH nanoflakes reduced reflection for wavelengths longer than 600 nm.

Graphical abstract: Hierarchical structures of AlOOH nanoflakes nested on Si nanopillars with anti-reflectance and superhydrophobicity

Article information

Article type
Paper
Submitted
09 May 2013
Accepted
04 Aug 2013
First published
08 Aug 2013

Nanoscale, 2013,5, 10014-10021

Hierarchical structures of AlOOH nanoflakes nested on Si nanopillars with anti-reflectance and superhydrophobicity

E. Yu, H. J. Lee, T. Ko, S. J. Kim, K. Lee, K. H. Oh and M. Moon, Nanoscale, 2013, 5, 10014 DOI: 10.1039/C3NR02395H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements