Issue 30, 2013

Using life cycle assessment to measure the environmental performance of catalysts and directing research in the conversion of CO2 into commodity chemicals: a look at the potential for fuels from ‘thin-air’

Abstract

This study uses the life cycle assessment (LCA) environmental management tool to measure the performance, at laboratory scale, of a range of iron and palladium based nanoparticle catalysts for carbon dioxide utilisation (CDU). The catalysts combine the reverse-water gas shift reaction with the Fischer–Tropsch process to convert carbon dioxide (CO2) into hydrocarbons (HCs) often employed as fuels and feedstocks for the chemical industry; offering the potential synthesis of HCs void of fossil fuel extraction. The catalysts operational performance was shown to vary considerably dependent on the specific iron:palladium loadings. LCA results afforded insight into ‘green’ catalyst design, palladium addition vastly improves catalyst performance. However, with such a high embodied environmental impact a trade-off is witnessed whereby the continual addition of palladium, although shows favourable CO2 conversion and HC yields, does not return a sufficient environmental offset in terms of produced HCs to cover the embodied impacts present in its formation. With the present laboratory setup their embodied environmental impacts are several orders of magnitude more impactful than traditional process pathways, largely due to the electricity use; a switch to renewable generators can reduce the overall process impacts by 90%, a significant step in increasing the competitiveness of the process, a use of renewable electricity in the synthesis of hydrogen further strengthens the case for its use in HC production has environmental merit. Indeed, from a material exchange perspective the H2 consumes is of a lesser environmental impact than those offset through the HCs produced. As with all laboratory processes, it is very likely that process scale-up and refinement will further enhance the results witnessed in this study.

Graphical abstract: Using life cycle assessment to measure the environmental performance of catalysts and directing research in the conversion of CO2 into commodity chemicals: a look at the potential for fuels from ‘thin-air’

Supplementary files

Additions and corrections

Article information

Article type
Paper
Submitted
13 Feb 2013
Accepted
15 May 2013
First published
21 May 2013

RSC Adv., 2013,3, 12244-12254

Using life cycle assessment to measure the environmental performance of catalysts and directing research in the conversion of CO2 into commodity chemicals: a look at the potential for fuels from ‘thin-air’

O. G. Griffiths, R. E. Owen, J. P. O'Byrne, D. Mattia, M. D. Jones and M. C. McManus, RSC Adv., 2013, 3, 12244 DOI: 10.1039/C3RA41900B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements