Issue 2, 2014

Changing the bridging connectivity pattern within a heterometallic assembly: design of single-source precursors with discrete molecular structures

Abstract

Three heterometallic single-source precursors with a proper Li : Co ratio for the lithium ion battery cathode material LiCoO2 are reported. The heterometallic compounds LiCoL3 (L = acac (1), tbaoac (2) or dhd (3)) were obtained on a large scale, in nearly quantitative yield using a one-step reaction that employs readily available starting reagents. The first of these precursors, heterometallic diketonate LiCo(acac)3 (1) (acac = pentane-2,4-dionate), was found to have a polymeric structure in the solid state that limits its volatility and prevents solubility in non-coordinating solvents. In order to design precursors with discrete molecular structures, we used asymmetric ligands, tert-butyl acetoacetate (tbaoac) and 2,2-dimethyl-hexanedionate (dhd), that exhibit different bridging properties at the two ends of the ligand and thus allow one to effectively change the bridging connectivity pattern within the heterometallic assembly. As a result, the heterometallic complexes LiCo(tbaoac)3 (2) and LiCo(dhd)3 (3), which consist of discrete tetranuclear molecules of Li2Co2L6, were successfully isolated and characterized. Out of the three heterometallic compounds reported in this work, LiCo(tbaoac)3 (2) appears to meet the application demands for an ideal single-source precursor. In accord with its discrete molecular structure, the complex is soluble in nearly all common solvents and retains its heterometallic structure in solution. Thus, it can be effectively used for the preparation of thin films by direct liquid injection techniques. The compound is highly volatile and exhibits a congruent sublimation with heterometallic fragments present in the gas phase. In addition, it shows the lowest decomposition temperature leading to phase-pure LiCoO2 and can be utilized for the preparation of nanoparticles of this cathode material. Importantly, single-source precursor 2 does not impose any measurable ligand extra cost on the formation of the target cathode material.

Graphical abstract: Changing the bridging connectivity pattern within a heterometallic assembly: design of single-source precursors with discrete molecular structures

Supplementary files

Article information

Article type
Edge Article
Submitted
23 Sep 2013
Accepted
24 Oct 2013
First published
25 Oct 2013

Chem. Sci., 2014,5, 813-818

Changing the bridging connectivity pattern within a heterometallic assembly: design of single-source precursors with discrete molecular structures

Z. Wei, H. Han, A. S. Filatov and E. V. Dikarev, Chem. Sci., 2014, 5, 813 DOI: 10.1039/C3SC52657G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements