Issue 15, 2013

Coalescence and compression in centrifuged emulsions studied with in situ optical microscopy

Abstract

We report an experimental method to investigate droplet dynamics in centrifuged emulsions and its application to study droplet compression and coalescence. The experimental setup permits in situ monitoring of an ensemble of droplets in a centrifuged monolayer of monodisperse emulsion droplets using optical microscopy. We studied a hexadecane-in-water emulsion stabilized by the ionic surfactant sodium-n-dodecyl sulfate as a model system. With a microfluidic T-junction emulsion droplets of 97 μm diameter are produced which are subsequently inserted into a rectangular glass chamber of 100 μm height. Using an emulsion which is stable against coalescence, we measured the steady-state oil volume fraction in the compressed layer as a function of the compressive force induced by centrifugation, and quantified the deformation of droplets upon compression. To induce coalescence, we decreased the SDS bulk concentration by dilution of the continuous phase with water before the start of centrifugation. The growth rate of the separated oil phase, which forms on top of the emulsion, and the extent of drop–drop coalescence in the droplet layer upon centrifugation were evaluated as a function of the radial acceleration. The potential of the method for studies in emulsion science and possible improvements of the experimental setup are discussed.

Graphical abstract: Coalescence and compression in centrifuged emulsions studied with in situ optical microscopy

Supplementary files

Article information

Article type
Paper
Submitted
12 Dec 2012
Accepted
19 Feb 2013
First published
01 Mar 2013

Soft Matter, 2013,9, 4026-4035

Coalescence and compression in centrifuged emulsions studied with in situ optical microscopy

T. Krebs, D. Ershov, C. G. P. H. Schroen and R. M. Boom, Soft Matter, 2013, 9, 4026 DOI: 10.1039/C3SM27850F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements