Issue 34, 2013

Cobalt doped LaSrTiO3−δ as an anode catalyst: effect of Co nanoparticleprecipitation on SOFCs operating on H2S-containing hydrogen

Abstract

This article compares the effects of Co doping on phase structures and stability of lanthanum strontium titanate (LST) anodes and electrochemical measurements in solid oxide fuel cells (SOFCs) employing H2S-containing H2 as fuel. The Co-doped LST (LSCT) with a perovskite structure was synthesized via a solid state approach, achieving excellent phase purity and refined particle size. The catalytic activity and electrochemical performance are significantly improved by introducing Co. A maximum power density of 300 mW cm−2 was achieved at 900 °C with 5000 ppm H2S–H2 in a fuel cell having a 300 μm thick YSZ electrolyte. Trace amounts of metallic Co nanoparticles with sizes typically no larger than 10 nm in diameter were detected on the LSCT surface after reduction in H2 at 900 °C. The nano-sized Co clusters could reduce the anode polarization resistance, as well as improve the cell performance, compared with undoped LST anodes. The LSCT anode catalyst was electrochemically stable in 5000 ppm H2S–H2 during the test time at high operating temperature. The LSCT anode catalyst also had relatively high redox stability in reversible oxidation–reduction cycles.

Graphical abstract: Cobalt doped LaSrTiO3−δ as an anode catalyst: effect of Co nanoparticle precipitation on SOFCs operating on H2S-containing hydrogen

Article information

Article type
Paper
Submitted
01 Apr 2013
Accepted
10 Jun 2013
First published
11 Jun 2013

J. Mater. Chem. A, 2013,1, 9689-9696

Cobalt doped LaSrTiO3−δ as an anode catalyst: effect of Co nanoparticle precipitation on SOFCs operating on H2S-containing hydrogen

S. Cui, J. Li, X. Zhou, G. Wang, J. Luo, K. T. Chuang, Y. Bai and L. Qiao, J. Mater. Chem. A, 2013, 1, 9689 DOI: 10.1039/C3TA11315A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements