Issue 38, 2013

Extrusion printing of ionic–covalent entanglement hydrogels with high toughness

Abstract

Three-dimensional (3D) printing of hydrogels has recently been investigated for use in tissue engineering applications. One major limitation in the use of synthetic hydrogels is their poor mechanical robustness but the development of ‘tough hydrogels’ in conjunction with additive fabrication techniques will accelerate the advancement of many technologies including soft robotics, bionic implants, sensors and controlled release systems. This article demonstrates that ionic–covalent entanglement (ICE) gels can be fabricated through a modified extrusion printing process that facilitates in situ photopolymerisation. The rheological properties of alginate–acrylamide hydrogel precursor solutions were characterised to develop formulations suitable for extrusion printing. A range of these printed hydrogels were prepared and their mechanical performance and swelling behaviour evaluated. ICE gels exhibit a remarkable mechanical performance because ionic cross links in the biopolymer network act as sacrificial bonds that dissipate energy under stress. The printed ICE gels have a work of extension 260 ± 3 kJ m−3. Swelling the hydrogels in water has a detrimental effect upon their mechanical properties, however swelling the hydrogels in a calcium chloride solution as a post-processing technique reduces the effects of swelling the hydrogels in water. The integration of the modified extrusion printing process with existing plastic 3D printing technologies will allow for the fabrication of functional devices.

Graphical abstract: Extrusion printing of ionic–covalent entanglement hydrogels with high toughness

Article information

Article type
Paper
Submitted
19 Aug 2013
Accepted
19 Aug 2013
First published
23 Aug 2013

J. Mater. Chem. B, 2013,1, 4939-4946

Extrusion printing of ionic–covalent entanglement hydrogels with high toughness

S. E. Bakarich, M. I. H. Panhuis, S. Beirne, G. G. Wallace and G. M. Spinks, J. Mater. Chem. B, 2013, 1, 4939 DOI: 10.1039/C3TB21159B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements