Issue 23, 2014

TAP study of toluene total oxidation over a Co3O4/La-CeO2 catalyst with an application as a washcoat of cordierite honeycomb monoliths

Abstract

The total oxidation of toluene was studied over a Co3O4/La-CeO2 catalyst in a Temporal Analysis of Products (TAP) set-up in the temperature range 713 K to 873 K in the presence and absence of dioxygen. It has been demonstrated that the reaction proceeds via a Mars–van Krevelen mechanism. The reaction rate increased 8.4 times if both toluene and dioxygen were present in the feed. The partial reaction order with respect to O2 diminished from 0.9 to 0.6 with an increase in temperature from 763 to 873 K. Adsorbed oxygen species with a lifetime of ∼8 s have been found on a catalyst fully oxidized by dioxygen. Catalysis of isotopically labeled 18O2/12C6H513CH3 results in the formation of products containing 18O, which indicates that both lattice and adsorbed oxygen are involved in the total oxidation of toluene. The role of adsorbed oxygen is activation of the C–H bond in toluene. The reaction network of the catalytic total oxidation of toluene consists of the following sequence: adsorption of toluene on the catalyst surface; activation of toluene by dehydrogenation with adsorbed oxygen; oxidation of activated toluene mainly by the lattice oxygen and re-oxidation of the reduced catalyst by dioxygen.

Graphical abstract: TAP study of toluene total oxidation over a Co3O4/La-CeO2 catalyst with an application as a washcoat of cordierite honeycomb monoliths

Article information

Article type
Paper
Submitted
28 Feb 2014
Accepted
24 Apr 2014
First published
28 Apr 2014

Phys. Chem. Chem. Phys., 2014,16, 11447-11455

Author version available

TAP study of toluene total oxidation over a Co3O4/La-CeO2 catalyst with an application as a washcoat of cordierite honeycomb monoliths

D. M. Gómez, V. V. Galvita, J. M. Gatica, H. Vidal and G. B. Marin, Phys. Chem. Chem. Phys., 2014, 16, 11447 DOI: 10.1039/C4CP00886C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements