Issue 24, 2014

An acetate bound cobalt oxide catalyst for water oxidation: role of monovalent anions and cations in lowering overpotential

Abstract

A homogeneous solution of Co(II) in acetate buffer at pH 7 is found to be an efficient water oxidation catalyst (WOC) showing significantly greater current density than Co(II) in phosphate buffer (Co–Pi) under identical conditions owing to the higher solubility of the former. When electrodeposited on ITO/FTO electrodes it forms acetate bound cobalt(II)-oxide materials (Co-Ac-WOC) showing a catalytic current density of 0.1 mA cm−2 at 830 mV and 1 mA cm−2 at 1 V in a pH 7 buffer solution. The morphology of Co-Ac-WOC and its evolution with time and deposition potential is investigated with AFM, HR-TEM and SEM. The chemical composition of Co-Ac-WOC is investigated using XPS, EDX, ATR-FTIR and combustion analysis which indicate that this material has a CoO core with chloride and acetate anions bound to the Co center. Sodium is found to be integrated in the Co-Ac-WOC. The presence of the sodium and chloride ions lowers the onset potential for the oxygen evolution reaction (OER) by 240 mV relative to the classic Co–Pi at pH 7. The lower onset potential and higher OER current lowers the exchange current density to 10−6.7 A cm−2 in Co-Ac-WOC relative to 10−8–10−10 A cm−2 in Co–Pi and its derivatives.

Graphical abstract: An acetate bound cobalt oxide catalyst for water oxidation: role of monovalent anions and cations in lowering overpotential

Supplementary files

Article information

Article type
Paper
Submitted
20 Mar 2014
Accepted
21 Mar 2014
First published
11 Apr 2014

Phys. Chem. Chem. Phys., 2014,16, 12221-12227

An acetate bound cobalt oxide catalyst for water oxidation: role of monovalent anions and cations in lowering overpotential

S. Dey, B. Mondal and A. Dey, Phys. Chem. Chem. Phys., 2014, 16, 12221 DOI: 10.1039/C4CP01205D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements