Issue 12, 2014

On the stability enhancement of cuprous oxide water splitting photocathodes by low temperature steam annealing

Abstract

Given the intermittent nature of solar radiation, the large-scale use of solar energy requires an efficient energy storage solution. So far, the only practical way to store such large amounts of energy is in the form of a chemical energy carrier, i.e., a fuel. Photoelectrochemical (PEC) cells offer the ability to convert solar energy directly into chemical energy in the form of hydrogen. Cuprous oxide (Cu2O) is being investigated for photoelectrochemical solar water splitting since it has a band gap of 2.0 eV with favorable energy band positions for water cleavage; it is abundant and environmentally friendly. A major challenge with Cu2O is its limited chemical stability in aqueous environments. We present a simple and low-cost treatment to create a highly stable photocathode configuration for H2 production, consisting of steam treatment of the multilayer structures. The role of this treatment was investigated and the optimized electrodes have shown photocurrents over −5 mA cm−2 with 90% stability over more than 50 h of light chopping (biased at 0 VRHE in pH 5 electrolyte).

Graphical abstract: On the stability enhancement of cuprous oxide water splitting photocathodes by low temperature steam annealing

Supplementary files

Article information

Article type
Paper
Submitted
11 Jul 2014
Accepted
03 Sep 2014
First published
04 Sep 2014

Energy Environ. Sci., 2014,7, 4044-4052

On the stability enhancement of cuprous oxide water splitting photocathodes by low temperature steam annealing

J. Azevedo, L. Steier, P. Dias, M. Stefik, C. T. Sousa, J. P. Araújo, A. Mendes, M. Graetzel and S. D. Tilley, Energy Environ. Sci., 2014, 7, 4044 DOI: 10.1039/C4EE02160F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements