Issue 34, 2014

Inertia- and deformation-driven migration of a soft particle in confined shear and Poiseuille flow

Abstract

The cross-stream migration of dilute soft particle suspensions under simple shear flow and Poiseuille flow between two parallel plates is investigated with the lattice Boltzmann-immersed boundary method. The competition between particle elastic contraction, fluid shear forces, and fluid inertial stress drives particle migration to a particular steady state position. With a small shear rate, the migration velocity of hard and soft particles is captured by a first order analysis of the Navier–Stokes equation. With a moderate shear flow, the qualitative dependence of the migration velocity and the particle position on the shear rate for both hard and soft particles deviates from the predictions. In a moderate Reynolds number (Re) shear flow, the observed hard sphere migration velocity has a weaker dependence on the Re than predicted and also a higher order dependence on the particle distance from the channel center. For soft spheres, a migration-free zone is observed near the center at a moderate Re and Weissenberg number (Wi). In Poiseuille flow, the soft particle migrates away from the wall to an off-center position dependent on the particle deformation and inertia, in contrast to hard sphere migration where the steady state position is independent of the shear rate.

Graphical abstract: Inertia- and deformation-driven migration of a soft particle in confined shear and Poiseuille flow

Article information

Article type
Paper
Submitted
29 Jan 2014
Accepted
21 Feb 2014
First published
21 Feb 2014

RSC Adv., 2014,4, 17908-17916

Author version available

Inertia- and deformation-driven migration of a soft particle in confined shear and Poiseuille flow

Y. Chen, RSC Adv., 2014, 4, 17908 DOI: 10.1039/C4RA00837E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements