Issue 32, 2014

Layer reduction method for fabricating Pd-coated Ni foams as high-performance ethanol electrode for anion-exchange membrane fuel cells

Abstract

An ideal electrode architecture that boosts the performance of anion-exchange membrane direct liquid fuel cells needs the electrode design to meet all the requirements of electrochemical kinetics and mass and charge transport characteristics. In this regard, here we propose a facile, well-controlled, and binder-free layer reduction method for preparing a three-dimensional foam electrode, which enables the catalytic particles to be directly reduced on the surface of the metal foam. This innovative layer reduction method not only avoids the formation of large catalytic aggregation, but also promises a thin and porous catalyst film that presents a sponge-like morphology uniformly coated onto the skeleton, thus both improving the electrochemical kinetics and enhancing the mass and charge transport of species. The results demonstrate that the application of the layer-reduced Pd/Ni foam electrode in an anion-exchange membrane direct ethanol fuel cell enables a peak power density and the maximum current density as high as 164 mW cm−2 and 1.34 A cm−2 at 60 °C, respectively, which are 1.03 and 1.16 times higher than those of the conventional design.

Graphical abstract: Layer reduction method for fabricating Pd-coated Ni foams as high-performance ethanol electrode for anion-exchange membrane fuel cells

Supplementary files

Article information

Article type
Paper
Submitted
18 Feb 2014
Accepted
29 Mar 2014
First published
31 Mar 2014

RSC Adv., 2014,4, 16879-16884

Layer reduction method for fabricating Pd-coated Ni foams as high-performance ethanol electrode for anion-exchange membrane fuel cells

Y. Li and Y. He, RSC Adv., 2014, 4, 16879 DOI: 10.1039/C4RA01399A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements