Issue 73, 2014

Facile synthesis and characterization of ZrO2 nanoparticles prepared by the AOP/hydrothermal route

Abstract

We report on the synthesis and characterization of ZrO2 nanoparticles prepared from zirconium(IV) butoxide in the absence of base or acid mineraliser by an advanced oxidation processes (AOP) and subsequent hydrothermal treatment which involves mixing and dissolution of the precursor for different temperatures. The structure, morphology and properties of the nanoparticles were characterized using XRD, FE-SEM, TEM, HRTEM, Raman spectroscopy, FT-IR spectroscopy, BET measurements and TGA measurements. The structural analysis by XRD and Raman spectroscopy confirms the ZrO2 specimens synthesized at 100 °C for 1 hour are amorphous and those treated at 150 °C and 200 °C for 1 hour were crystalline. Structural analysis by Raman spectroscopy confirms tetragonal ZrO2 specimens obtained at temperatures higher than 100 °C as a majority phase. From FE-SEM images, the AOP/hydrothermal route mainly produced microspheres comprised of primary nanoparticles. HRTEM images of ZrO2 microspheres, after treatment at 100 °C, show the beginning of crystallization, with only a few clear lattice fringes dispersed in the specimens. TEM and HRTEM images of ZrO2, after treatment at 150 °C and 200 °C indicate that the microspheres are the aggregation of small nanoparticles with a size of approximately 5–8 nm, and FFT analysis confirms the high crystallinity of the specimens. TGA analyses show a distinctive behavior for each of the ZrO2 specimens, after treatment at 100 °C, 150 °C and 200 °C. FT-IR analysis of ZrO2 specimens after hydrothermal treatment revealed the presence of groups, such as –OH, –CH2, and –CH at the surface. In addition, FT-IR spectra show a decrease in the amount of functional groups attached to the surface of the nanoparticles when the reaction temperature is increased. This result was also confirmed by TGA analysis. The ZrO2 specimens prepared by the AOP/hydrothermal route exhibited a high surface area of 511–184 m2 g−1.

Graphical abstract: Facile synthesis and characterization of ZrO2 nanoparticles prepared by the AOP/hydrothermal route

Article information

Article type
Paper
Submitted
22 May 2014
Accepted
14 Aug 2014
First published
01 Sep 2014

RSC Adv., 2014,4, 38484-38490

Facile synthesis and characterization of ZrO2 nanoparticles prepared by the AOP/hydrothermal route

D. S. S. Padovini, D. S. L. Pontes, C. J. Dalmaschio, F. M. Pontes and E. Longo, RSC Adv., 2014, 4, 38484 DOI: 10.1039/C4RA04861J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements