Issue 80, 2014

Influence of aging on in situ hydrothermally synthesized Cu-SSZ-13 catalyst for NH3-SCR reaction

Abstract

Selective catalytic reduction (SCR) of NOx by ammonia in the presence of excess oxygen has become a potential method to remove NOx from diesel exhaust. The present work optimized the Si/Al ratios and crystallization time for the in situ hydrothermal synthesis of Cu-SSZ-13, which is a highly efficient catalyst for SCR. The NH3-SCR activities of the fresh and aging Cu-SSZ-13 samples were evaluated using a fixed bed reactor. The Cu-SSZ-13 crystallized for 72 h showed better catalytic activity and hydrothermal stability than the other catalysts. The fresh samples presented excellent DeNOx catalytic activities even under large space velocity (640 000 h−1). Preliminary aging treatment (720 °C, 10 h) had slight negative effects on the SCR activity of the samples. Deep aging treatments (800 °C, 20 h) deactivated the catalyst significantly. The TEM, XRD, NMR, EPR, H2-TPR, XPS and N2 adsorption were carried out to elucidate the deactivation mechanism of the aging SCR catalyst. It was found that deep aging treatments resulted in the severe dealumination, the damage of the zeolite framework and the change of active copper species of the catalyst, which finally led to the poor catalytic activity of NH3-SCR.

Graphical abstract: Influence of aging on in situ hydrothermally synthesized Cu-SSZ-13 catalyst for NH3-SCR reaction

Article information

Article type
Paper
Submitted
30 May 2014
Accepted
28 Aug 2014
First published
28 Aug 2014

RSC Adv., 2014,4, 42403-42411

Author version available

Influence of aging on in situ hydrothermally synthesized Cu-SSZ-13 catalyst for NH3-SCR reaction

J. Wang, Z. Peng, H. Qiao, L. Han, W. Bao, L. Chang, G. Feng and W. Liu, RSC Adv., 2014, 4, 42403 DOI: 10.1039/C4RA05140H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements