Issue 94, 2014

Structural, optical and electrical characterization of gadolinium and indium doped cadmium oxide/p-silicon heterojunctions for solar cell applications

Abstract

Gadolinium and indium co-doped CdO thin films were prepared by a pulsed laser deposition method. The XRD and XPS results indicated that Gd3+ and In3+ ions occupied locations in the interstitial positions and/or Cd2+-ion vacancies in the CdO lattice. The FESEM images showed that the films were homogeneous and consisted of nanograins with a size range of 23–40 nm. The optical band gap of the CdO thin films can be engineered over a wide range of 2.72–3.56 eV by introducing Gd and In dopants. Such transparent semiconducting Gd and In co-doped CdO films were then grown on p-type Si substrates to fabricate n-CdO/p-Si heterojunction devices. The important junction parameters such as the series resistance (Rs), ideality factor (n) and Schottky barrier height (Φb) were determined by analysing different plots from the current density–voltage (JV) characteristics. The obtained results indicated that the electrical properties of the heterojunction diodes were controlled by the dopant concentration. The p-Si/n-Cd1−xyGdxInyO heterojunction diode showed the best values of open circuit voltage, Voc = 1.04 V and short circuit current density, Jsc = 11.4 mA cm−2 under an illumination intensity of 100 mW cm−2, which was suitable for solar cell applications.

Graphical abstract: Structural, optical and electrical characterization of gadolinium and indium doped cadmium oxide/p-silicon heterojunctions for solar cell applications

Article information

Article type
Paper
Submitted
30 May 2014
Accepted
09 Oct 2014
First published
13 Oct 2014

RSC Adv., 2014,4, 52451-52460

Author version available

Structural, optical and electrical characterization of gadolinium and indium doped cadmium oxide/p-silicon heterojunctions for solar cell applications

L. L. Pan, K. K. Meng, G. Y. Li, H. M. Sun and J. S. Lian, RSC Adv., 2014, 4, 52451 DOI: 10.1039/C4RA05141F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements