Issue 96, 2014

Direct numerical simulations of sedimenting spherical particles at non-zero Reynolds number

Abstract

We performed direct numerical simulations, using a smoothed profile method to investigate the inertial effects on the static and dynamic properties of a sedimenting suspension over a wide range of volume fractions from 0.01 to 0.4. We found that at Reynolds number Re ≤ 0.5, static and dynamic properties show the typical non-Brownian, Stokes regime characteristics, due to insignificant inertial effects. The microstructure analysis at the high Re revealed that at Re = 1 inertial forces have significant effects and these create a deficiency of particles around a given particle, which is more pronounced in the direction of gravity than in the perpendicular direction. This deficiency decreased the velocity fluctuations and particle diffusion in the vertical direction, whereas both of these properties remain unchanged in the perpendicular direction. Moreover, at Re = 10, strong inertial forces generated a significant deficit of particles in both directions, which decreased velocity fluctuations and particle diffusion in both directions. We also observed that the range of volume fraction affected by inertial forces is increased with the increase of Re. At high volume fraction ϕ ≳ 0.15, intrinsic many-body interactions dominate the phenomena and govern the transport properties thereafter.

Graphical abstract: Direct numerical simulations of sedimenting spherical particles at non-zero Reynolds number

Article information

Article type
Paper
Submitted
23 Sep 2014
Accepted
06 Oct 2014
First published
06 Oct 2014

RSC Adv., 2014,4, 53681-53693

Author version available

Direct numerical simulations of sedimenting spherical particles at non-zero Reynolds number

A. Hamid, J. J. Molina and R. Yamamoto, RSC Adv., 2014, 4, 53681 DOI: 10.1039/C4RA11025K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements