Issue 107, 2014

Sheet resistance variation of graphene grown on annealed and mechanically polished Cu films

Abstract

Graphene was grown on a Cu film, processed by annealing and mechanical polishing. The sheet resistance of graphene shows ∼57% decrease by mechanical polishing for raw Cu and ∼20% decrease by annealing for 50 nm SiO2 polishing.

Graphical abstract: Sheet resistance variation of graphene grown on annealed and mechanically polished Cu films

Article information

Article type
Communication
Submitted
03 Oct 2014
Accepted
03 Nov 2014
First published
04 Nov 2014

RSC Adv., 2014,4, 62453-62456

Sheet resistance variation of graphene grown on annealed and mechanically polished Cu films

J. Lee, C. Park and H. Kim, RSC Adv., 2014, 4, 62453 DOI: 10.1039/C4RA11734D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements