Issue 15, 2015

Nano sized heterogeneous acid catalyst from Ceiba pentandra stalks for production of biodiesel using extracted oil from Ceiba pentandra seeds

Abstract

Heterogeneous acid catalyst of nano size was prepared by the method of sulfonation of C. pentandra stalks and used to convert C. pentandra seed oil to biodiesel. The structure of the catalyst was characterized and physicochemical properties of extracted oil as well as effects of different preparation conditions on biodiesel yield were investigated. A scanning electron microscopy (SEM) photograph showed that the catalyst had a porous structure which enhanced the catalytic ability. From the Brunauer–Emmet–Teller (BET) analysis, the catalyst specific surface area was 714 m2 g−1 and average pore size was 4.8 nm. The optimal triglyceride conversion of 99% was attained at a reaction temperature of 220 °C, methanol to oil ratio of 18 : 1 M and catalyst concentration of 1.5 wt%. Reusability of the catalyst was studied which demonstrates drastic decrease in energy expenditure and waste generation in the production of biodiesel. Biodiesel viscosity was higher whereas other properties were found to be similar to those of commercial diesel oil and compared with ASTM D6751 and EN standards.

Graphical abstract: Nano sized heterogeneous acid catalyst from Ceiba pentandra stalks for production of biodiesel using extracted oil from Ceiba pentandra seeds

Article information

Article type
Paper
Submitted
28 Oct 2014
Accepted
06 Jan 2015
First published
06 Jan 2015

RSC Adv., 2015,5, 11180-11187

Author version available

Nano sized heterogeneous acid catalyst from Ceiba pentandra stalks for production of biodiesel using extracted oil from Ceiba pentandra seeds

K. S. Parthiban and M. Perumalsamy, RSC Adv., 2015, 5, 11180 DOI: 10.1039/C4RA13328E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements