Issue 15, 2015

Removal of cadmium and lead from aqueous solutions using nitrilotriacetic acid anhydride modified ligno-cellulosic material

Abstract

Cadmium (Cd2+) and lead (Pb2+) posed severe health risks worldwide. To remove these contaminants from aqueous solution, a nitrilotriacetic acid anhydride (NTAA) modified ligno-cellulosic material (NTAA-LCM) was prepared and characterized. Batch sorption experiments were performed to evaluate the influences of various factors such as contact time, pH, ionic strength, temperature and initial metal concentration on the sorption of metals. Results from elemental analysis and FTIR suggested that ester bonds and amine groups were successfully introduced into NTAA-LCM. Fast adsorption rates were observed, and the maximum sorption capacities of NTAA-LCM for Cd2+ and Pb2+ reached 143.4 and 303.5 mg gāˆ’1 at 298 K, respectively. Both the pseudo-second-order model and the Langmuir model described the adsorption extremely well. Thermodynamic analysis showed that the sorption was endothermic but spontaneous. The sorption was a chemical process involving surface chelation and ion exchange; this was reflected in the metal/NTA ratio. Additionally, NTAA-LCM retained high metal sorption capacity after seven cycles of regeneration by HNO3.

Graphical abstract: Removal of cadmium and lead from aqueous solutions using nitrilotriacetic acid anhydride modified ligno-cellulosic material

Article information

Article type
Paper
Submitted
19 Nov 2014
Accepted
12 Jan 2015
First published
12 Jan 2015

RSC Adv., 2015,5, 11475-11484

Removal of cadmium and lead from aqueous solutions using nitrilotriacetic acid anhydride modified ligno-cellulosic material

Y. Huang, C. Yang, Z. Sun, G. Zeng and H. He, RSC Adv., 2015, 5, 11475 DOI: 10.1039/C4RA14859B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements