Issue 12, 2015

Sulfuration–desulfuration reaction sensing effect of intrinsic ZnO nanowires for high-performance H2S detection

Abstract

This study explores a novel H2S sensing-effect of an intrinsic (i.e., uncatalyzed) ZnO nanowire (NW) array chemiresistive sensing material. A bottom-up constructed dense array of ZnO NWs with a diameter of 50–60 nm is found and verified to be sulfurized by H2S to form ZnS that can be later desulfurized back to ZnO by ambient oxygen, which is different from the conventional ZnO sensing mechanism where the resistance of semiconductor ZnO is changed via electron depletion layer variation by surface adsorbed oxygen. When H2S is introduced into this ZnO NW sensor, the sulfuration-reaction produced ZnS brings about a dramatic enhancement of sensing performances like sensitivity, limits-of-detection and selectivity. After H2S removal, the desulfuration-reaction helps to realize rapid signal recovery that significantly improves the repeatability of the sensor. Thanks to the nanoscale size effect induced new sensing mechanism, intrinsic ZnO-NWs experimentally exhibit low-temperature (150 °C) high-performance detection toward H2S of ppb to ppm concentration, which could not be realized before even if catalyst-enhanced ZnO was used for H2S sensing at higher temperature.

Graphical abstract: Sulfuration–desulfuration reaction sensing effect of intrinsic ZnO nanowires for high-performance H2S detection

Article information

Article type
Paper
Submitted
05 Nov 2014
Accepted
18 Dec 2014
First published
18 Dec 2014

J. Mater. Chem. A, 2015,3, 6330-6339

Sulfuration–desulfuration reaction sensing effect of intrinsic ZnO nanowires for high-performance H2S detection

H. Huang, P. Xu, D. Zheng, C. Chen and X. Li, J. Mater. Chem. A, 2015, 3, 6330 DOI: 10.1039/C4TA05963H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements