Issue 42, 2014

Atomic layer deposition of zinc oxide onto and into P3HT for hybrid photovoltaics

Abstract

Hybrid organic–inorganic bulk heterojunction (BHJ) photovoltaic devices continue to be a promising alternative for present semiconductor solar cell technology. However, to become competitive hybrid devices must improve their currently low efficiencies. A major challenge to overcome is the control over the hybrid morphology, and more specifically, directing interpenetrated nano-scale phase separated continuous networks through the active layer. Here we demonstrate that atomic layer deposition (ALD) can be used to deposit hybrid BHJ photovoltaic films with exceptional control over film composition and morphology. The BHJ is prepared by exposing a pre-formed conjugated polymer film to an ALD alternating sequence of a metal oxide precursor and water. In this study ZnO was grown from cycles of diethyl zinc (DEZ) and water inside pre-formed P3HT films. We find that DEZ diffuses into the amorphous regions of the P3HT film, followed by oxidation by water to form ZnO crystalline particles (5–10 nm). Importantly, the inorganic crystalline phase is formed within the polymer amorphous regions while the ordered polymer domains are maintained. Investigation of the growth mechanism and control over the number of ALD cycles allowed us to direct a BHJ morphology with: (I) a continuous ZnO network through the P3HT film; (II) a descending concentration gradient of ZnO from the top surface down to the substrate; and (III) a dense ZnO electron transporting layer on the polymer film surface. The successful morphology-control is manifested in efficient photocurrent generation, evident from time resolved microwave-photoconductivity measurements and device performances that are similar to those reported for intensely optimized conjugated polymer/metal oxide solar cells.

Graphical abstract: Atomic layer deposition of zinc oxide onto and into P3HT for hybrid photovoltaics

Supplementary files

Article information

Article type
Paper
Submitted
24 Jul 2014
Accepted
31 Aug 2014
First published
02 Sep 2014

J. Mater. Chem. C, 2014,2, 8903-8910

Author version available

Atomic layer deposition of zinc oxide onto and into P3HT for hybrid photovoltaics

S. Obuchovsky, I. Deckman, M. Moshonov, T. Segal Peretz, G. Ankonina, T. J. Savenije and G. L. Frey, J. Mater. Chem. C, 2014, 2, 8903 DOI: 10.1039/C4TC01629G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements