Issue 8, 2016

Improvement of the gas cluster ion beam-(GCIB)-based molecular secondary ion mass spectroscopy (SIMS) depth profile with O2+ cosputtering

Abstract

Over the last decade, cluster ion beams have displayed their capability to analyze organic materials and biological specimens. Compared with atomic ion beams, cluster ion beams non-linearly enhance the sputter yield, suppress damage accumulation and generate high mass fragments during sputtering. These properties allow successful Secondary Ion Mass Spectroscopy (SIMS) analysis of soft materials beyond the static limit. Because the intensity of high mass molecular ions is intrinsically low, enhancing the intensity of these secondary ions while preserving the sample in its original state is the key to highly sensitive molecular depth profiles. In this work, bulk poly(ethylene terephthalate) (PET) was used as a model material and analyzed using Time-of-Flight SIMS (ToF-SIMS) with a pulsed Bi32+ primary ion. The optimized hardware of a 10 kV Ar2500+ Gas Cluster Ion Beam (GCIB) with a low kinetic energy (200–500 V) oxygen ion (O2+) as a cosputter beam was employed for generating depth profiles and for examining the effect of beam parameters. The results were then quantitatively analyzed using an established erosion model. It was found that the ion intensity of the PET monomer ([M + H]+) and its large molecular fragment ([M − C2H4O + H]+) steadily declined during single GCIB sputtering, with distortion of the distribution information. However, under an optimized GCIB-O2+ cosputter, the secondary ion intensity quickly reached a steady state and retained >95% intensity with respect to the pristine surface, although the damage cross-section was larger than that of single GCIB sputtering. This improvement was due to the oxidation of molecules and the formation of –OH groups that serve as proton donors to particles emitted from the surface. As a result, the ionization yield was enhanced and damage to the chemical structure was masked. Although O2+ is known to alter the chemical structure and cause damage accumulation, the concurrently used GCIB could sufficiently remove the surface layer and allow the damage to be masked by the enhanced ionization yield when the ion-solid interaction volume was kept shallow with a low O2+ energy. This low O2+ energy (200 V) cosputtering also produced a smoother surface than a single GCIB. Because the oxidized species were produced by O2+ and removed by GCIB simultaneously, a sufficiently high O2+ current density was required to produce adequate enhancements. Therefore, it was found that 10 kV with 2 × 10−6 A per cm2 Ar2500+ and 200 V with 3.2 × 10−4 A per cm2 O2+ produced the best profile.

Graphical abstract: Improvement of the gas cluster ion beam-(GCIB)-based molecular secondary ion mass spectroscopy (SIMS) depth profile with O2+ cosputtering

Supplementary files

Article information

Article type
Paper
Submitted
31 Dec 2015
Accepted
08 Mar 2016
First published
08 Mar 2016

Analyst, 2016,141, 2523-2533

Improvement of the gas cluster ion beam-(GCIB)-based molecular secondary ion mass spectroscopy (SIMS) depth profile with O2+ cosputtering

Y. Chu, H. Liao, K. Lin, H. Chang, W. Kao, D. Kuo, Y. You, K. Chu, C. Wu and J. Shyue, Analyst, 2016, 141, 2523 DOI: 10.1039/C5AN02677F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements