Issue 2, 2016

Waterborne polyurethanes from CO2 based polyols with comprehensive hydrolysis/oxidation resistance

Abstract

Carbon dioxide based oligo(carbonate–ether) diols (CO2-polyols) with both carbonate units and ether units in one polymer chain were prepared by copolymerization of CO2 and propylene oxide (PO) using a zinc–cobalt double metal complex as the catalyst, and used to prepare CO2 based waterborne polyurethanes (CO2-WPUs). The carbonate units in CO2-polyols improved the mechanical and oxidation resistance properties of CO2-WPUs, while the ether units in CO2-polyols enhanced the hydrolysis resistance of CO2-WPUs. The tensile strength of CO2-WPUs didn't show any obvious drop during immersion in a 0.25% sodium hydroxide solution, whereas that of oligoesterol based WPUs dropped over 50% after 300 min, and lost their mechanical properties after 520 min of immersion. Meanwhile, the retention of the tensile strength of the CO2-WPUs was ca. 72% even after 46 h of immersion in a 6 wt% H2O2 solution, while it was only ca. 32% for the oligoetherol based WPUs. Moreover, the thermal–mechanical performance of CO2-WPU films can be conveniently improved by adjusting the carbonate unit content (CU%) in CO2-polyols, i.e. when CU% in CO2-polyol increased from 30% to 66%, the glass transition temperature (Tg) increased from −7.8 °C to 18.8 °C, accompanied by an increase of tensile strength from 35.6 MPa to 52.2 MPa, and a decrease of elongation at break from 630% to 410%. This work suggests that the CO2-WPU may be a promising alternative to conventional WPU whose oligoetherol and oligoesterol were from fossil resources, and its comprehensive hydrolysis/oxidation resistance may be a bonus unavailable from common oligomerol based WPUs.

Graphical abstract: Waterborne polyurethanes from CO2 based polyols with comprehensive hydrolysis/oxidation resistance

Supplementary files

Article information

Article type
Paper
Submitted
19 Jun 2015
Accepted
20 Aug 2015
First published
21 Aug 2015

Green Chem., 2016,18, 524-530

Waterborne polyurethanes from CO2 based polyols with comprehensive hydrolysis/oxidation resistance

J. Wang, H. Zhang, Y. Miao, L. Qiao, X. Wang and F. Wang, Green Chem., 2016, 18, 524 DOI: 10.1039/C5GC01373A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements