Issue 7, 2016

Friction and conductance imaging of sp2- and sp3-hybridized subdomains on single-layer graphene oxide

Abstract

We investigated the subdomain structures of single-layer graphene oxide (GO) by characterizing local friction and conductance using conductive atomic force microscopy. Friction and conductance mapping showed that a single-layer GO flake has subdomains several tens to a few hundreds of nanometers in lateral size. The GO subdomains exhibited low friction (high conductance) in the sp2-rich phase and high friction (low conductance) in the sp3-rich phase. Current–voltage spectroscopy revealed that the local current flow in single-layer GO depends on the quantity of hydroxyl and carboxyl groups, and epoxy bridges within the 2-dimensional carbon layer. The presence of subdomains with different sp2/sp3 carbon ratios on a GO flake was also confirmed by chemical mapping using scanning transmission X-ray microscopy. These results suggest that spatial mapping of the friction and conductance can be used to rapidly identify the composition of heterogeneous single-layer GO at nanometer scale, which is essential for understanding charge transport in nanoelectronic devices.

Graphical abstract: Friction and conductance imaging of sp2- and sp3-hybridized subdomains on single-layer graphene oxide

Supplementary files

Article information

Article type
Paper
Submitted
19 Sep 2015
Accepted
14 Jan 2016
First published
15 Jan 2016

Nanoscale, 2016,8, 4063-4069

Friction and conductance imaging of sp2- and sp3-hybridized subdomains on single-layer graphene oxide

H. Lee, N. Son, H. Y. Jeong, T. G. Kim, G. S. Bang, J. Y. Kim, G. W. Shim, K. C. Goddeti, J. H. Kim, N. Kim, H. Shin, W. Kim, S. Kim, S. Choi and J. Y. Park, Nanoscale, 2016, 8, 4063 DOI: 10.1039/C5NR06469D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements