Issue 64, 2015

Esterification of free fatty acids with supercritical methanol for biodiesel production and related kinetic study

Abstract

Non-catalytic esterification of free fatty acids (oleic acid) with methanol for biodiesel production was studied in the reaction temperature range of 220–280 °C. To optimize the reaction conditions, the influence of the process parameters on biodiesel yield was studied with response surface methodology (RSM). It was found that biodiesel yield decreases at an exorbitant temperature. Thus, a reaction temperature below 260 °C is appropriate. At a temperature of 260 °C, with a methanol to oleic acid molar ratio of 20/1 and a reaction time of 60 min, the biodiesel yield can reach about 95%. In addition, a simplified approach to implementing a kinetic model for the esterification reaction was developed. The kinetic parameters were analyzed and discussed, and the experimental results were found to fit a first-order kinetic rate law. The rate constant of esterification in supercritical methanol increases significantly in comparison to that of subcritical conditions, and the apparent activation energy is higher than that of subcritical conditions.

Graphical abstract: Esterification of free fatty acids with supercritical methanol for biodiesel production and related kinetic study

Article information

Article type
Paper
Submitted
02 Mar 2015
Accepted
26 May 2015
First published
26 May 2015

RSC Adv., 2015,5, 52072-52078

Author version available

Esterification of free fatty acids with supercritical methanol for biodiesel production and related kinetic study

T. Jin, B. Wang, J. Zeng, C. Yang, Y. Wang and T. Fang, RSC Adv., 2015, 5, 52072 DOI: 10.1039/C5RA03709C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements