Issue 57, 2015

Gold loaded titanium dioxide–carbon nanotube composites as active photocatalysts for cyclohexane oxidation at ambient conditions

Abstract

Photocatalytic oxidation of neat cyclohexane (CHA) with H2O2 as an oxidant was carried out using gold modified versions of several types of materials, including titania nanotubes (Au/TNT), reduced graphene oxide (Au/RGO) as well as titania nanotubes–multiwalled carbon nanotubes composite (Au/TNT–MWCNT) under UV irradiation (125 W, λ > 296 nm). The synthesized nanoparticles were characterized using physical adsorption of nitrogen, X-ray diffraction, transmission electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy, and the reaction products were analyzed by GC-MS. Both Au/RGO and Au/TNT–MWCNT catalysts promoted partial CHA oxidation with higher conversion (6–9.0%) and selectivity (60–75%) for cyclohexanone, exceeding Au/TNT, TNT–MWCNT and TNT catalysts (conv. 2.1–4%, sel. 32–55%). Au/TNT–MWCNT synthesized using hydrothermal deposition methods exhibited the highest catalytic activity. This was chiefly attributable to the high surface hydrophobicity of MWCNT that accelerated CHA adsorption, bonding of cyclohexanol and cyclohexanone to TNT as well as decomposition of H2O2 on gold nanoparticles. Increasing the surface area as well as decreasing the average particle size of Au0 to 15 nm of hexagonal shape contributed to the superior catalytic activity of Au/TNT–MWCNT, in achieving an average rate of 0.0035 mmol−1 g−1 min−1 and conversion was 9.0% after 12 h of reaction. The latter catalyst exceeded industrially synthesized Co based catalysts (3.6%) operated at high temperatures. For confirming the autoxidation process, a radical scavenger offered a proof that the oxidation follows a radical-chain mechanism. The differences in surface morphology, light absorption and surface properties of Au/TNT when incorporated with MWCNT were well investigated. The photocatalytic oxidation mechanism elucidated using active scavengers suggested that OH˙ and O2˙ play key roles in the oxidation of CHA.

Graphical abstract: Gold loaded titanium dioxide–carbon nanotube composites as active photocatalysts for cyclohexane oxidation at ambient conditions

Supplementary files

Article information

Article type
Paper
Submitted
24 Mar 2015
Accepted
07 May 2015
First published
07 May 2015

RSC Adv., 2015,5, 46405-46414

Author version available

Gold loaded titanium dioxide–carbon nanotube composites as active photocatalysts for cyclohexane oxidation at ambient conditions

M. M. Mohamed, RSC Adv., 2015, 5, 46405 DOI: 10.1039/C5RA05253J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements