Issue 66, 2015

A facile one-step spray-coating process for the fabrication of a superhydrophobic attapulgite coated mesh for use in oil/water separation

Abstract

Oil/water separation is a worldwide problem due to the increasing emission of industrial oily waste water and the frequent oil spill accidents. Herein, we demonstrate, for the first time, superhydrophobic attapulgite coated mesh films for gravity driven oil water separation, which were fabricated by a facile one-step spray-coating process. The as-prepared attapulgite coated mesh films show both superhydrophobic and superoleophilic properties simultaneously with a high water contact angle of 155° ± 1° and an oil contact angle of 0°. Thus, they can be used to separate a series of oil/water mixtures, such as kerosene, chloroform, and petroleum ether with separation efficiency up to 97% for the kerosene/water mixture. In addition, the as-prepared coated mesh still maintained separation efficiency above 94% and stable recyclability after 40 separation cycles with the surface morphology of the attapulgite coated mesh nearly unchanged. Besides, the separation mechanism for the oil/water mixture was elaborated by interpreting the different states of water droplet on the surface before and during separation, which has been discussed scarcely. Furthermore, the as-prepared attapulgite coated mesh could keep its superhydrophobic property under various harsh conditions, not only for pure water but also for corrosive acidic, alkaline and salt solutions, which suggests attractive potential for practical oil/water separation in industry and everyday life.

Graphical abstract: A facile one-step spray-coating process for the fabrication of a superhydrophobic attapulgite coated mesh for use in oil/water separation

Supplementary files

Article information

Article type
Paper
Submitted
07 May 2015
Accepted
04 Jun 2015
First published
04 Jun 2015

RSC Adv., 2015,5, 53802-53808

Author version available

A facile one-step spray-coating process for the fabrication of a superhydrophobic attapulgite coated mesh for use in oil/water separation

J. Li, L. Yan, H. Li, J. Li, F. Zha and Z. Lei, RSC Adv., 2015, 5, 53802 DOI: 10.1039/C5RA08478D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements