Issue 82, 2015

Catalytic oxidation of 4-chlorophenol with magnetic Fe3O4 nanoparticles: mechanisms and particle transformation

Abstract

Magnetite (Fe3O4) is usually inert and when combined with metal catalysts or enzymes it forms a composite that exhibits both magnetism and catalytic activity. However, it has been reported that Fe3O4 nanoparticles have intrinsic peroxidase-like activity. In this study, super paramagnetic Fe3O4 nanoparticles with a diameter of about 30 nm were synthesized using self-designed experimental devices under mild conditions. Moreover, 4-chlorophenol (4-CP), which is a priority pollutant that widely exists in the environment but is recalcitrant towards chemical and biological degradation, was used as a model compound to test the catalytic activity of the synthesized Fe3O4 nanoparticles and analyse the mechanisms for 4-CP removal. Besides, surface analysis techniques, such as SEM, XRD and Raman spectroscopy, were used to investigate the transformation of the nanoparticles and further verify the interaction between the nanoparticles and 4-CP. The results revealed that the synthesized Fe3O4 nanoparticles show high catalytic activity even after being used several times, and acidic conditions are favourable for the dechlorination of 4-CP. However, 4-CP could also be degraded under neutral and alkali conditions. In the process 4-CP was transformed to formic acid, acetic acid and other byproducts. Adsorption tests indicated that the adsorption process does not play an important role in 4-CP removal, but it occurs between 4-CP and Fe3O4. The surface morphology of the Fe3O4 nanoparticles changed a lot and the reactive sites on the surface increased, which resulted in the higher activity of the particles after being used. The crystal structure of the nanoparticles did not change, suggesting the role of Fe3O4 nanoparticles as catalysts. Moreover, Raman spectra reflected that the adsorption and catalytic oxidation were surface reaction processes. It is proposed that the hydroxyl radical produced during the reaction is the main cause for the degradation of 4-CP. The reaction of H2O2 with ferrous to produce hydroxyl radical is the initial step, and is very important for the overall process.

Graphical abstract: Catalytic oxidation of 4-chlorophenol with magnetic Fe3O4 nanoparticles: mechanisms and particle transformation

Supplementary files

Article information

Article type
Paper
Submitted
02 Jun 2015
Accepted
13 Jul 2015
First published
13 Jul 2015

RSC Adv., 2015,5, 66927-66933

Author version available

Catalytic oxidation of 4-chlorophenol with magnetic Fe3O4 nanoparticles: mechanisms and particle transformation

R. Cheng, G. Li, C. Cheng, L. Shi, X. Zheng and Z. Ma, RSC Adv., 2015, 5, 66927 DOI: 10.1039/C5RA10433E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements