Issue 119, 2015

Removal of methylene blue from wastewater under a low power irradiation source by Zn, Mn co-doped TiO2 photocatalysts

Abstract

In present study, a series of Zn, Mn co-doped titania (TiO2) photocatalysts with varying dopant concentrations (0.0, 1.0 and 2.0 at%) were synthesized via the sol–gel process. The co-doped photocatalysts were characterized using XRD, XPS, SEM, TEM, Raman, FTIR and UV-vis DRS techniques, where methylene blue was used as a probe environmental pollutant. The photocatalytic performances of the synthesized photocatalysts were evaluated under very low (∼2 W) UV and visible power irradiation sources. Analysis of X-ray diffraction patterns suggests the multiphase structure of the photocatalyst, while XPS results demonstrate that in co-doped TiO2, the oxidation state of doped Zn metal ions is 2 (Zn2+), while Mn is in +2 and +3 (Mn2+/Mn3+) state. The optical study results reveal a red shift in the co-doped samples, where with an increase in co-dopant concentration, the band gap is reduced. The highest photocatalytic degradation of MB is obtained with 1.0 at% Zn, Mn co-doped TiO2, which is due to enhancement of light absorbance in the UV region caused by the additional impurity energy levels introduced in the bad-gap of TiO2 by the co-dopants. The as-synthesized 1.0 at% Zn, Mn co-doped TiO2 provides a very high degradation efficiency (66.6 W−1 min−1) and thus may be practically used in the dye removal process efficiently.

Graphical abstract: Removal of methylene blue from wastewater under a low power irradiation source by Zn, Mn co-doped TiO2 photocatalysts

Supplementary files

Article information

Article type
Paper
Submitted
19 Sep 2015
Accepted
30 Oct 2015
First published
30 Oct 2015

RSC Adv., 2015,5, 98166-98176

Author version available

Removal of methylene blue from wastewater under a low power irradiation source by Zn, Mn co-doped TiO2 photocatalysts

P. Benjwal and K. K. Kar, RSC Adv., 2015, 5, 98166 DOI: 10.1039/C5RA19353B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements