Issue 33, 2016

Diamond@carbon-onion hybrid nanostructure as a highly promising electrocatalyst for the oxygen reduction reaction

Abstract

The modification of nanodiamond derived carbon nano-onions by the formation of additional edge- and defect-sites through the rupturing of surface graphene layers is investigated for its application towards the oxygen reduction reaction (ORR) in acidic media. The catalyst, which had a high degree of edge- and defect-sites on its surface, demonstrated a remarkably enhanced ORR performance compared to that of an edge- and defect-sites poor catalyst, where the onset potential increased from 0.53 to 0.91 V, with a mass activity of 2.70 mA mg−1 (at 0.8 V). According to our electrochemical impedance spectroscopy study, the enhancement in the catalytic performance between the two catalysts could have originated from the charge transfer resistance. Moreover, an accelerated degradation test revealed the outstanding stability of the edge- and defect-rich catalyst, compared to that of Pt/C performed in harsh conditions, which could have originated from the diamond core. The selection of carbon material with adequate modifications to enhance the catalytic activity and stability towards the ORR drafted a scheme for potential catalysts.

Graphical abstract: Diamond@carbon-onion hybrid nanostructure as a highly promising electrocatalyst for the oxygen reduction reaction

Supplementary files

Article information

Article type
Paper
Submitted
30 Dec 2015
Accepted
02 Mar 2016
First published
03 Mar 2016

RSC Adv., 2016,6, 27528-27534

Diamond@carbon-onion hybrid nanostructure as a highly promising electrocatalyst for the oxygen reduction reaction

J. Koh, S. H. Park, M. W. Chung, S. Y. Lee and S. I. Woo, RSC Adv., 2016, 6, 27528 DOI: 10.1039/C5RA28066D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements