Issue 32, 2015

Hollow zeolite encapsulated Ni–Pt bimetals for sintering and coking resistant dry reforming of methane

Abstract

Highly dispersed Ni–Pt bimetallic nanoparticles encapsulated in hollow silicalite-1 single crystals (1.5Ni–0.5Pt@Hol S-1) were a superior catalyst for sintering and coking resistant dry (CO2) reforming of CH4. Large Ni particles loaded on the surface of solid silicalite-1 crystals triggered coke formation, which simultaneously degraded the catalytic activity of small Ni particles. With Ni encapsulated in hollow crystals, the small Ni particles inhibited coke formation. The encapsulating shell prevented coke formed outside from degrading the activity of nickel on the inside, leading to stable high activity even in the presence of carbon. Compared with single metals (Ni or Pt), 1.5Ni–0.5Pt@Hol S-1 enhanced the dispersion of nickel and platinum. In the dry reforming of methane, the 1.5Ni–0.5Pt@Hol S-1 catalyst operated stably under high gaseous hourly space velocity (GHSV = 72 000 ml g−1 h−1) without any inert gas. Only 1.0 wt% carbon deposition was observed by thermogravimetric analysis (TGA) after 6 h of the reaction. Hollow zeolite crystals can reliably support coke resistant catalysts for dry reforming of CH4 and multi-metallic catalysts with well-dispersed nanoparticles.

Graphical abstract: Hollow zeolite encapsulated Ni–Pt bimetals for sintering and coking resistant dry reforming of methane

Supplementary files

Article information

Article type
Paper
Submitted
15 May 2015
Accepted
29 Jun 2015
First published
29 Jun 2015

J. Mater. Chem. A, 2015,3, 16461-16468

Author version available

Hollow zeolite encapsulated Ni–Pt bimetals for sintering and coking resistant dry reforming of methane

C. Dai, S. Zhang, A. Zhang, C. Song, C. Shi and X. Guo, J. Mater. Chem. A, 2015, 3, 16461 DOI: 10.1039/C5TA03565A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements