Issue 7, 2016

Controlled aqueous synthesis of ultra-long copper nanowires for stretchable transparent conducting electrode

Abstract

The environmentally benign synthesis of ultra-long copper nanowires with successful control of diameter and length for stretchable transparent conducting electrodes (TCEs) is reported. Ultra-long copper nanowires (CuNWs) with an average length of 92.5 μm (maximum length up to 260 μm) and an average diameter of 47 nm were synthesized using environmentally friendly water–alcohol mixtures and L-ascorbic acid as a reducing agent. A facile removal of insulating surface layers, such as organic capping molecules and copper oxide/hydroxide, by short-chain organic acid treatment allowed low contact resistance between the CuNWs without post-reductive treatment at elevated temperatures. The CuNWs were directly spray-coated on glass or polydimethylsiloxane (PDMS) at a low processing temperature of 130 °C. The CuNW TCE on a glass substrate exhibited a low sheet resistance of 23.1 Ohm sq−1 and a high optical transmittance of 84.1% at 550 nm. Furthermore, the CuNWs were directly spray-coated on stretchable PDMS, which showed a low sheet resistance of 4.1 Ohm sq−1 and a high optical transmittance of 70% at 550 nm.

Graphical abstract: Controlled aqueous synthesis of ultra-long copper nanowires for stretchable transparent conducting electrode

Supplementary files

Article information

Article type
Paper
Submitted
02 Nov 2015
Accepted
04 Jan 2016
First published
20 Jan 2016

J. Mater. Chem. C, 2016,4, 1441-1447

Author version available

Controlled aqueous synthesis of ultra-long copper nanowires for stretchable transparent conducting electrode

C. Hwang, J. An, B. D. Choi, K. Kim, S. Jung, K. Baeg, M. Kim, K. M. Ok and J. Hong, J. Mater. Chem. C, 2016, 4, 1441 DOI: 10.1039/C5TC03614C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements