Issue 28, 2016

Raman microspectroscopic analysis of fibers in beverages

Abstract

This technical note illustrates the applicability of Raman microspectroscopy (RM) for the analysis of the synthetic fiber content in different beverages (beer and mineral water). The particles and fibers were collected by filtration on a cellulose nitrate membrane filter (pore size = 0.45 μm) and subsequently identified and quantified by RM. Our results show no significant differences (p = 0.95) in the statistical distribution of fibers in beverage and blank samples, which suggests external contamination sources. Moreover, most of the identified fibers consisted of cellulose, which is a natural fiber and harmless compared to synthetic fibers. The other fibers identified were mainly made of polyethylene, which is used as a packaging material for the cellulose nitrate filter. Our study highlights the need for spectroscopic analysis as well as the use of adequate blank samples and an almost particle-free lab environment. Spectroscopic identification is crucial for the discrimination between cellulose and synthetic fibers; otherwise artefacts cannot be recognized and the interpretation will be misleading. The qualitative and quantitative analysis performed in our laboratory could not confirm the contamination of beverages with synthetic fibers reported by previous studies which relied on optical identification alone.

Graphical abstract: Raman microspectroscopic analysis of fibers in beverages

Supplementary files

Article information

Article type
Technical Note
Submitted
21 Apr 2016
Accepted
13 Jun 2016
First published
15 Jun 2016
This article is Open Access
Creative Commons BY-NC license

Anal. Methods, 2016,8, 5722-5725

Raman microspectroscopic analysis of fibers in beverages

A. C. Wiesheu, P. M. Anger, T. Baumann, R. Niessner and N. P. Ivleva, Anal. Methods, 2016, 8, 5722 DOI: 10.1039/C6AY01184E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements