Issue 8, 2017

Creation of a dual-porosity and dual-depth micromodel for the study of multiphase flow in complex porous media

Abstract

Silicon-based microfluidic devices, so-called micromodels in this application, are particularly useful laboratory tools for the direct visualization of fluid flow revealing pore-scale mechanisms controlling flow and transport phenomena in natural porous media. Current microfluidic devices with uniform etched depths, however, are limited when representing complex geometries such as the multiple-scale pore sizes common in carbonate rocks. In this study, we successfully developed optimized sequential photolithography to etch micropores (1.5 to 21 μm width) less deeply than the depth of wider macropores (>21 μm width) to improve the structural realism of an existing single-depth micromodel with a carbonate-derived pore structure. Surface profilimetry illustrates the configuration of the dual-depth dual-porosity micromodel and is used to estimate the corresponding pore volume change for the dual-depth micromodel compared to the equivalent uniform- or single-depth model. The flow characteristics of the dual-depth dual-porosity micromodel were characterized using micro-particle image velocimetry (μ-PIV), relative permeability measurements, and pore-scale observations during imbibition and drainage processes. The μ-PIV technique provides insights into the fluid dynamics within microfluidic channels and relevant fluid velocities controlled predominantly by changes in etching depth. In addition, the reduction of end-point relative permeability for both oil and water in the new dual-depth dual-porosity micromodel compared to the equivalent single-depth micromodel implies more realistic capillary forces occurring in the new dual-depth micromodel. Throughout the imbibition and drainage experiments, the flow behaviors of single- and dual-depth micromodels are further differentiated using direct visualization of the trapped non-wetting phase and the preferential mobilization of the wetting phase in the dual-depth micromodel. The visual observations agree with the relative permeability results. These findings indicate that dual-porosity and dual-depth micromodels have enhanced physical realism that is pertinent to oil recovery processes in complex porous media.

Graphical abstract: Creation of a dual-porosity and dual-depth micromodel for the study of multiphase flow in complex porous media

Supplementary files

Article information

Article type
Paper
Submitted
28 Oct 2016
Accepted
03 Mar 2017
First published
06 Mar 2017

Lab Chip, 2017,17, 1462-1474

Creation of a dual-porosity and dual-depth micromodel for the study of multiphase flow in complex porous media

W. Yun, C. M. Ross, S. Roman and A. R. Kovscek, Lab Chip, 2017, 17, 1462 DOI: 10.1039/C6LC01343K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements