Issue 11, 2016

Anisotropy and domain state dependent enhancement of single domain ferrimagnetism in cobalt substituted Ni–Zn ferrites

Abstract

Nanocrystalline Co substituted Ni–Zn ferrites with the general formula CoxNi0.6−xZn0.4Fe2O4 (x = 0.0 to 0.6) were prepared by a precursor combustion method. Average crystallite size, as estimated by using a Scherrer method and the particle size obtained from transmission electron microscopy (TEM) techniques, was found to be in the range of 10–30 nm. EDX and XRD analysis confirms the presence of Co, Ni, Zn, Fe and oxygen and the desired phases in the prepared nanoparticles. Selective area electron diffraction (SAED) analysis confirms the crystalline nature of the prepared nanoparticles. It is observed that Co substitution has a pronounced effect on the magnetic properties such as MR, MS and HC and also on the Curie temperature (TC), which is found to decrease from 420 °C for non-substituted Ni–Zn ferrites to 325 °C for the highest substitution of x = 0.6. These effects are assigned to the higher magnetocrystalline anisotropy of Co than Ni and to the size dependent existence of single domain–superparamagnetic particles distribution. Comparatively, the dominant existence of single domain particles with Co substitution over superparamagnetic particles in non-substituted nickel zinc ferrites is extensively investigated in this article.

Graphical abstract: Anisotropy and domain state dependent enhancement of single domain ferrimagnetism in cobalt substituted Ni–Zn ferrites

Supplementary files

Article information

Article type
Paper
Submitted
08 Jul 2016
Accepted
20 Sep 2016
First published
21 Sep 2016

New J. Chem., 2016,40, 9275-9284

Anisotropy and domain state dependent enhancement of single domain ferrimagnetism in cobalt substituted Ni–Zn ferrites

S. G. Gawas, S. S. Meena, S. M. Yusuf and V. M. S. Verenkar, New J. Chem., 2016, 40, 9275 DOI: 10.1039/C6NJ02121B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements