Issue 3, 2017

Atomic layer deposition of ZnO on carbon black as nanostructured anode materials for high-performance lithium-ion batteries

Abstract

Although zinc oxide (ZnO), a low-cost and naturally abundant material, has a high theoretical specific capacity of 987 mA h g−1 for hosting lithium ions, its application as an anode material has been hindered by its rapid capacity fading, mainly due to a large volume change (around 228%) upon repeated charge–discharge cycles. Herein, using carbon black (CB) powder as a support, ZnO–carbon black (denoted as ZnO–CB) nanocomposites were successfully fabricated using the atomic layer deposition (ALD) method. This method was able to produce strong interfacial molecular bindings between ZnO nanoclusters and the carbon surface that provide stable and robust electrical contact during lithiation and delithiation processes, as well as ZnO nanoclusters rich in oxygen vacancies (OVs) for faster Li-ion transport. Overall, the nanocomposites were able to deliver a high discharge specific capacity of 2096 mA h g−1ZnO at 100 mA g−1 and stable cyclic stability with a specific capacity of 1026 mA h g−1ZnO maintained after 500 cycles. The composites also have excellent rate capability, and a reversible capacity at a high 1080 mA h g−1ZnO at 2000 mA g−1. The facile but unique synthesis method demonstrated in this work for producing nanostructures rich in OVs and nanocomposites with strong coupling via interfacial molecular bindings could be extended to the synthesis of other oxide based anode materials and therefore could have general significance for developing high energy density lithium ion batteries.

Graphical abstract: Atomic layer deposition of ZnO on carbon black as nanostructured anode materials for high-performance lithium-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
07 Oct 2016
Accepted
04 Dec 2016
First published
07 Dec 2016

Nanoscale, 2017,9, 1184-1192

Atomic layer deposition of ZnO on carbon black as nanostructured anode materials for high-performance lithium-ion batteries

S. Lu, H. Wang, J. Zhou, X. Wu and W. Qin, Nanoscale, 2017, 9, 1184 DOI: 10.1039/C6NR07868K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements