Issue 59, 2016, Issue in Progress

Low-voltage electro-optical memory device based on NiO nanorods dispersed in a ferroelectric liquid crystal

Abstract

We present a low voltage driven electro-optical memory device fabricated by dispersing nano-sized nickel oxide (nNiO) composed of short length nanorods into a ferroelectric liquid crystal (FLC) host material. The nNiO/FLC composite showed a tremendous decrease in saturation voltage compared to the pristine FLC material along with non-volatile memory behavior which is confirmed through dielectric spectroscopy, polarized optical microscopy and electro-optical response methods. This drop off in saturation voltage is due to the fast alignment of dipolar nNiO and mesogens in the nNiO/FLC composite along the direction of the applied electric field and reduced screening effect. The non-volatile memory behavior of the composite is attributed to the reduction in the depolarization field by adsorption of impurity ions onto the surface of nNiO, which is verified through dielectric spectroscopy and electrical conductivity measurements. These studies pave the way for fabricating non-volatile, low power electro-optical memory devices for advanced information storage applications.

Graphical abstract: Low-voltage electro-optical memory device based on NiO nanorods dispersed in a ferroelectric liquid crystal

Supplementary files

Article information

Article type
Paper
Submitted
14 Feb 2016
Accepted
25 May 2016
First published
27 May 2016

RSC Adv., 2016,6, 53873-53881

Low-voltage electro-optical memory device based on NiO nanorods dispersed in a ferroelectric liquid crystal

A. Chandran, J. Prakash, J. Gangwar, T. Joshi, A. K. Srivastava, D. Haranath and A. M. Biradar, RSC Adv., 2016, 6, 53873 DOI: 10.1039/C6RA04037C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements