Issue 69, 2016, Issue in Progress

Modified surface-active ionic liquid-coated magnetic graphene oxide as a new magnetic solid phase extraction sorbent for preconcentration of trace nickel

Abstract

A new selective and high-capacity magnetic solid phase extraction sorbent was developed for preconcentration of trace amounts of nickel ions prior to their determination by flame atomic absorption spectrometry (FAAS). The sorbent was prepared by immobilization of the dimethylglyoxime ligand (DMG) onto magnetic graphene oxide nanoparticles (MGO) coated with the surface-active ionic liquid-based surfactant, 1-hexadecyl-3-methylimidazolium chloride ([C16MIM][Cl]). The prepared adsorbent (DMG-C16MIM/MGO) was characterized by FESEM, TEM, BET, XRD, VSM and FT-IR spectroscopy. The fabricated adsorbent combines the advantages of the superior adsorption capability of modified graphene oxide and magnetic separability of magnetic nanoparticles to provide high adsorption capacity, and easy isolation from sample solutions. Several important parameters influencing the extraction efficiency, such as pH, amount of adsorbent, extraction time, elution conditions, sample volume, interfering ions and adsorption capacity were studied and optimized. Applying all optimum conditions in the process, a high preconcentration factor of 100, linear range of 0.56–200 μg L−1, detection limit of 0.16 μg L−1, and precision (RSD%, n = 6) of 1.21%, were obtained for nickel. Following modification with 1-hexadecyl-3-methylimidazolium chloride and DMG, the modified adsorbent selectivity toward nickel ions was raised more than nine-fold compared to the unmodified magnetic graphene oxide. The adsorption capacity within a 15 min interaction time based on the Langmuir model was 129.87 and 26.59 mg g−1 for modified and unmodified adsorbents, respectively. The recoveries in the case of real samples varied within the range of 96.8–99.2% confirming good performance of the method in various real samples.

Graphical abstract: Modified surface-active ionic liquid-coated magnetic graphene oxide as a new magnetic solid phase extraction sorbent for preconcentration of trace nickel

Article information

Article type
Paper
Submitted
15 Feb 2016
Accepted
24 Jun 2016
First published
29 Jun 2016

RSC Adv., 2016,6, 64193-64202

Modified surface-active ionic liquid-coated magnetic graphene oxide as a new magnetic solid phase extraction sorbent for preconcentration of trace nickel

E. Aliyari, M. Alvand and F. Shemirani, RSC Adv., 2016, 6, 64193 DOI: 10.1039/C6RA04163A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements