Issue 85, 2016, Issue in Progress

Control of SrO buffer-layer formation on Si(001) using the pulsed-laser deposition technique

Abstract

The deoxidation and passivation of a silicon surface represents one of the most important steps in the successful integration of functional oxides with silicon. Due to its reactivity and dissimilar properties with respect to oxides, silicon surfaces are conditioned using various buffer systems. Despite the quality of the resulting surface, these Sr-based buffers have not been commercialized because of the reactivity of the metallic Sr. SrO has demonstrated properties that are competitive with metallic Sr, but a successful integration with silicon has not yet been proven. In the present study we have determined the optimal pulsed-laser deposition (PLD) conditions for the SrO-induced deoxidation of a silicon surface, which results in a 2 × 1 reconstructed surface. Additionally, the as-prepared surface is oxide-free and atomically flat. The results show that the amount of SrO plays the most critical role in the optimization of the whole process. Deposited in batch mode, the amount of SrO affects the morphologies of the surfaces, which change from a dimerized surface to SrO islands and a polycrystalline layer in the final stage. However, in the case of an insufficient amount of deposited SrO, pits are formed on the surface, drastically increasing its roughness. The successful optimization of the PLD conditions for the formation of a SrO buffer layer opens a new pathway for interfacing oxides with silicon.

Graphical abstract: Control of SrO buffer-layer formation on Si(001) using the pulsed-laser deposition technique

Supplementary files

Article information

Article type
Paper
Submitted
23 Jun 2016
Accepted
21 Aug 2016
First published
22 Aug 2016

RSC Adv., 2016,6, 82150-82156

Control of SrO buffer-layer formation on Si(001) using the pulsed-laser deposition technique

Z. Jovanović, M. Spreitzer, U. Gabor and D. Suvorov, RSC Adv., 2016, 6, 82150 DOI: 10.1039/C6RA16311D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements