Issue 89, 2016, Issue in Progress

LaNiO3-nanorod/graphene composite as an efficient bi-functional catalyst for zinc–air batteries

Abstract

Developing low-cost catalysts for high-performance oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is highly desirable. Herein, LaNiO3 nanorods supported on reduced graphene oxide (LNO-NR/RGO) were synthesized via a hydrothermal method, and characterized by XRD, SEM, TEM, XPS, TG and BET. The results show that the LaNiO3 nanorods have a perovskite structure and good dispersion behavior on the RGO sheets. The catalytic activity of the composite for ORR and OER has been studied by using a rotating disk electrode (RDE) technique. LNO-NR/RGO shows better oxygen electrode potential, a maximum cathodic current density of −4.26 mA cm−2 at 1600 rpm was obtained, and the ORR mainly favors a direct four electron pathway. Compared with pure LaNiO3 nanorods and commercial Pt/C, LNO-NR/RGO is more active for OER, a lower onset potential for OER and a bigger anodic current at the same applied potential are observed. The cycle performance and the stabilities of LNO-NR/RGO toward charge/discharge are significantly higher than those of commercial Pt/C in zinc–air batteries. Such excellent catalytic activity is attributed to the synergistic effect between LNO-NR and RGO along with the 1D conduction in the composite.

Graphical abstract: LaNiO3-nanorod/graphene composite as an efficient bi-functional catalyst for zinc–air batteries

Supplementary files

Article information

Article type
Paper
Submitted
27 Jun 2016
Accepted
06 Sep 2016
First published
06 Sep 2016

RSC Adv., 2016,6, 86386-86394

LaNiO3-nanorod/graphene composite as an efficient bi-functional catalyst for zinc–air batteries

J. Hu, Q. Liu, Z. Shi, L. Zhang and H. Huang, RSC Adv., 2016, 6, 86386 DOI: 10.1039/C6RA16610E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements