Issue 19, 2016

A highly stretchable strain sensor based on a graphene/silver nanoparticle synergic conductive network and a sandwich structure

Abstract

Strain sensors with superb stretchability are highly desirable for applications in wearable devices. Here we report a simple method via immersion-swelling followed by in situ reduction to fabricate a highly stretchable strain sensor with a graphene/AgNPs synergic conductive network and a sandwich structure (i.e., one insulating layer sandwiched between two conductive layers). In the strain sensor, AgNPs were in situ formed without adding any other organic stabilizer, and graphene nanosheets acted as a conductive bridge between them, ensuring the wearable sensor excellent initial electrical conductivity (σ ≈ 1.4 × 105 S m−1). During stretching, the pure graphene/TPU insulating layer of the sandwich structure maintained the high stretchability, and the graphene located between the cracks of AgNPs resulted in the connection of conductivity networks under high strain (1000% maximum strain). What is more, the low detection limit (0.5%), high gauge factor (7 at 50% strain, 476 at 500% strain) and high working stability (more than 1000 cycles at 50% strain) of the strain sensor enable it to meet the needs for numerous applications in wearable devices.

Graphical abstract: A highly stretchable strain sensor based on a graphene/silver nanoparticle synergic conductive network and a sandwich structure

Supplementary files

Article information

Article type
Paper
Submitted
21 Jan 2016
Accepted
01 Apr 2016
First published
01 Apr 2016

J. Mater. Chem. C, 2016,4, 4304-4311

A highly stretchable strain sensor based on a graphene/silver nanoparticle synergic conductive network and a sandwich structure

S. Chen, Y. Wei, X. Yuan, Y. Lin and L. Liu, J. Mater. Chem. C, 2016, 4, 4304 DOI: 10.1039/C6TC00300A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements