Issue 34, 2016

Nano-KTN@Ag/PVDF composite films with high permittivity and low dielectric loss by introduction of designed KTN/Ag core/shell nanoparticles

Abstract

A designed nano-KTN/Ag core/shell structure endows nano-KTN@Ag/PVDF composite films with excellent properties of remarkably enhanced dielectric permittivity, low loss tangent and flexibility. It has been found that the incorporation of KTN@Ag nanoparticles can increase the average crystallite size of the β phase in a polymer matrix, which elevates the polarization level of the polymer matrix and increases the dielectric permittivity of the nanocomposites. 25 vol% composites own a remarkably enhanced dielectric permittivity (εr = 230) at 100 Hz, which is due to MWS polarization at the internal interface between nano-KTN@Ag and the PVDF matrix, the increased induced polarization of the nanoparticles and the “boundary layer capacitor effect”. The low loss tangent is achieved because of an enhanced polarization reverse speed by the Ag shells and a blockage of charge transfer by PVDF chains. The percolation threshold of the composite films (fc = 0.317) was predicted by the percolation theory, and the theoretical results were in good agreement with the experimental data.

Graphical abstract: Nano-KTN@Ag/PVDF composite films with high permittivity and low dielectric loss by introduction of designed KTN/Ag core/shell nanoparticles

Article information

Article type
Paper
Submitted
05 Jun 2016
Accepted
28 Jul 2016
First published
30 Jul 2016

J. Mater. Chem. C, 2016,4, 8070-8076

Nano-KTN@Ag/PVDF composite films with high permittivity and low dielectric loss by introduction of designed KTN/Ag core/shell nanoparticles

G. Chen, X. Wang, J. Lin, W. Yang, H. Li, Y. Wen, L. Li, Z. Jiang and Q. Lei, J. Mater. Chem. C, 2016, 4, 8070 DOI: 10.1039/C6TC02321E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements