Issue 12, 2017

Fabrication of high-performance p-type thin film transistors using atomic-layer-deposited SnO films

Abstract

Here, we demonstrate high-performance p-type thin film transistors (TFTs) with a SnO channel layer grown by atomic layer deposition (ALD). The performance of the SnO TFTs relies on hole carriers and defects in SnO and near the back-channel surface of SnO as well as the quality of the gate dielectric/SnO interface. The growth of SnO films at a high temperature of 210 °C effectively suppresses the hole carrier concentration, leading to a high on-current/off-current (Ion/Ioff) ratio. In addition, the SnO films grown at 210 °C achieve high field effect mobility (μFE) compared with the SnO films grown at lower temperatures because of their large grain size and lower impurity contents. However, the SnO films grown at 210 °C still contain defects and hole carriers, especially near the back-channel surface. The post-deposition process – back-channel surface passivation with ALD-grown Al2O3 followed by post-deposition annealing at 250 °C – considerably alleviates the defects and hole carriers, resulting in superior TFT performance (Ion/Ioff: 2 × 106, subthreshold swing: 1.8 V dec−1, μFE: ∼1 cm2 V−1 s−1). We expect that the SnO ALD and subsequent process will provide a new opportunity for producing high-performance p-type oxide TFTs.

Graphical abstract: Fabrication of high-performance p-type thin film transistors using atomic-layer-deposited SnO films

Supplementary files

Article information

Article type
Paper
Submitted
02 Nov 2016
Accepted
24 Feb 2017
First published
27 Feb 2017

J. Mater. Chem. C, 2017,5, 3139-3145

Fabrication of high-performance p-type thin film transistors using atomic-layer-deposited SnO films

S. H. Kim, I. Baek, D. H. Kim, J. J. Pyeon, T. Chung, S. Baek, J. Kim, J. H. Han and S. K. Kim, J. Mater. Chem. C, 2017, 5, 3139 DOI: 10.1039/C6TC04750E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements