Issue 5, 2017

A new method of Sn purification and isotopic determination with a double-spike technique for geological and cosmochemical samples

Abstract

This study aimed at developing a new methodology for measuring tin isotope compositions in geological and cosmochemical materials. The analytical procedures included sample treatment, chemical purification and measurement protocol of Sn isotopes by mass spectrometry. A new separation protocol relying on three-stage ion-exchange chromatography was optimized. Sn was separated from matrices and isobaric interferents (i.e. In, Cd and Te), as well as elements that could form molecular isobaric interferents (i.e. Ge, As, Se, Mo and Ag) with a high recovery close to 100%. The Sn isotope analysis was performed by using a Neptune Plus MC-ICP-MS equipped with jet cones. A double-spike technique was used for correcting isotope fractionation during the chemical procedure and instrumental mass bias correction and this method was shown to provide better reproducibility. All measurements were carried out at a concentration of 10 ppb and as little as 20 ng of Sn are sufficient for a single measurement. The precision of Sn standard solution NIST SRM 3161a with the double-spike method was 0.05‰ (2SD) for δ124Sn. The intermediate precision of the whole procedure was tested by measuring multiple dissolutions of several geostandards (BHVO-1, BHVO-2 and AGV-1) and a value of 0.11‰ (2SD) was obtained. This new method has the best precision and accuracy for Sn isotope determination attained so far and has been applied to the analysis of geological and cosmochemical samples.

Graphical abstract: A new method of Sn purification and isotopic determination with a double-spike technique for geological and cosmochemical samples

Article information

Article type
Paper
Submitted
23 Jan 2017
Accepted
13 Apr 2017
First published
13 Apr 2017

J. Anal. At. Spectrom., 2017,32, 1009-1019

A new method of Sn purification and isotopic determination with a double-spike technique for geological and cosmochemical samples

X. Wang, C. Fitoussi, B. Bourdon and Q. Amet, J. Anal. At. Spectrom., 2017, 32, 1009 DOI: 10.1039/C7JA00031F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements