Issue 25, 2017

Nanocarbon based composite electrodes and their application in microbial fuel cells

Abstract

Other than their use as new energy sources, microbial fuel cells (MFCs) are promising for wastewater treatment as they allow for significant energy savings and a high treatment efficiency if they are integrated with a MBR (membrane bioreactor), where the electricity can be in situ used over the cathode membrane, in spite of the insignificant power generation, the small current and low voltage output. The performance and cost of MFCs are largely influenced by the electrode materials. Nanocarbon materials with superior physical and chemical properties that conventional materials cannot match are crucial for the development of MFCs. In this review, recent research progress and applications of carbon nanotubes (CNTs), graphene, graphitic carbon nitride (g-C3N4) and their composites as MFC anode/cathodes are highlighted, for insights into the characteristics, the modification/preparation methods and the performance of such MFCs. Different composite catalytic cathode membranes in integrated MFC–MBR systems are also reviewed. Integrating a MBR with a catalytic cathode membrane in MFCs improves the effluent quality and overcomes the deficiencies of MFC, while using the recovered bio-energy to offset the energy consumption for aeration and filtration.

Graphical abstract: Nanocarbon based composite electrodes and their application in microbial fuel cells

Article information

Article type
Review Article
Submitted
18 Feb 2017
Accepted
02 May 2017
First published
09 May 2017

J. Mater. Chem. A, 2017,5, 12673-12698

Nanocarbon based composite electrodes and their application in microbial fuel cells

Y. Zhang, L. Liu, B. Van der Bruggen and F. Yang, J. Mater. Chem. A, 2017, 5, 12673 DOI: 10.1039/C7TA01511A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements