Issue 37, 2017

Crab shell-derived nitrogen-doped micro-/mesoporous carbon as an effective separator coating for high energy lithium–sulfur batteries

Abstract

Lithium–sulfur (Li–S) batteries with high energy density are considered as promising for rechargeable energy storage. However, the shuttle effect hinders their practical application. Here, novel nitrogen-doped micro-/mesoporous carbon (N-MIMEC), derived from crab shells, was fabricated via a sustainable and cost-effective route. A modified separator coated with an N-MIMEC layer for Li–S batteries exhibits many advantages: (1) the micro-/mesopores provide enough surface area for sulfide adsorption, and accommodate the volume change; (2) the nitrogen in N-MIMEC enhances polysulfide adsorption and increases the electronic conductivity of the carbon framework; and (3) the conductive layer acts as an upper current collector, increasing the electrical conductivity. An enhanced Li–S battery with an N-MIMEC-coated separator was constructed, with an initial capacity of 1301 mA h g−1 and a high reversible capacity of 971.3 mA h g−1 after 100 cycles at 0.1C. Also, upon further increasing the sulfur loading from 63 wt% to 77 wt%, the corresponding Li–S batteries exhibit a high reversible capacity of 578 mA h g−1 after 500 cycles at 1C, with a decay rate of about 0.029% per cycle. Considering the green and sustainable source material, simple preparation and good electrochemical performance, the N-MIMEC-coated separator is promising for Li–S battery applications.

Graphical abstract: Crab shell-derived nitrogen-doped micro-/mesoporous carbon as an effective separator coating for high energy lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
14 Jun 2017
Accepted
19 Aug 2017
First published
21 Aug 2017

J. Mater. Chem. A, 2017,5, 19892-19900

Crab shell-derived nitrogen-doped micro-/mesoporous carbon as an effective separator coating for high energy lithium–sulfur batteries

H. Shao, F. Ai, W. Wang, H. Zhang, A. Wang, W. Feng and Y. Huang, J. Mater. Chem. A, 2017, 5, 19892 DOI: 10.1039/C7TA05192A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements