Issue 13, 2018

A guanidinium ionic liquid-based surfactant as an adequate solvent to separate and preconcentrate cadmium and copper in water using in situ dispersive liquid–liquid microextraction

Abstract

An in situ dispersive liquid–liquid microextraction (DLLME) method together with flame atomic absorption spectroscopy (FAAS) is developed for the extraction and determination of copper and cadmium from aqueous samples using as an extraction solvent a low cytotoxic ionic liquid (IL)-based surfactant, specifically decylguanidinium chloride (C10Gu-Cl). The IL-based surfactant 1-hexadecyl-3-butylimidazolium bromide (C16C4Im-Br) is also used for comparative purposes. In the method, N,N′-bis(salicylidene)thiocarbohydrazide is the complexing agent, and the metathesis reaction in the in situ DLLME is accomplished using lithium bis[(trifluoromethyl)sulfonyl]imide. The main parameters affecting the extraction efficiency of the method, i.e. pH of the sample, NaCl content, and vortex time, are properly optimized with a Doehlert experimental design. The method using C10Gu-Cl exhibited a limit of detection (LOD) four times lower and with slightly better reproducibility than that of the imidazolium IL-based surfactant. The validation of the in situ DLLME-FAAS method with C10Gu-Cl is accomplished for the simultaneous extraction and quantification of copper and cadmium from water. The optimum method requires 10 mL of aqueous sample and ∼25 μL of the IL-based surfactant to obtain a microdroplet of ∼21 μL, which is diluted up to 120 μL with acetonitrile to perform the analytical determination of both metals. LODs down to 0.3 and 0.5 μg L−1 were reached with the entire in situ IL-DLLME-FAAS for copper and cadmium, respectively. The inter-day relative standard deviation values were lower than 17% for both metal ions; with relative recoveries of 97.8% and 102%, and enrichment factors of 85 and 94, for copper and cadmium, respectively, at a low spiked level (4 and 6 μg L−1, respectively). Furthermore, the developed method shows adequate precision and accuracy evaluated with a certified reference material, the absence of matrix effects, and high tolerance limits towards common cations (between 80 and 600) for the analysis of tap water, while accomplishing the requirements of green analytical chemistry.

Graphical abstract: A guanidinium ionic liquid-based surfactant as an adequate solvent to separate and preconcentrate cadmium and copper in water using in situ dispersive liquid–liquid microextraction

Supplementary files

Article information

Article type
Paper
Submitted
04 Jan 2018
Accepted
10 Feb 2018
First published
12 Feb 2018

Anal. Methods, 2018,10, 1529-1537

A guanidinium ionic liquid-based surfactant as an adequate solvent to separate and preconcentrate cadmium and copper in water using in situ dispersive liquid–liquid microextraction

M. Khiat, I. Pacheco-Fernández, V. Pino, T. Benabdallah, J. H. Ayala and A. M. Afonso, Anal. Methods, 2018, 10, 1529 DOI: 10.1039/C8AY00022K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements